Núcleo y cavidad en el moldeo por inyección: principios de diseño y mejores prácticas

The cavity generally forms the exterior of a molded part, and the core forms features such as bores, recesses and internal walls. Review the parting line, gate, cooling and ejection together. Cosmetic faces and functional dimensions should drive where these features are placed.

Para los equipos de ingeniería y de aprovisionamiento

Reviewing Core and Cavity Design Before Tooling?

Core and cavity decisions control parting lines, draft, cooling, ejection and many sources of flash or warpage. Review these items against the real resin and inspection plan before mold steel is cut.

  • Confirm parting line and side-action requirements from the CAD model
  • Review cooling, gate and ejection together rather than as separate checks
  • Define cosmetic zones, tolerances and annual volume before tooling release

Request a core and cavity DFM review →   Ver servicios de moldeo por inyección de nailon

Understanding Core and Cavity Fundamentals

The cavity often forms the outside profile and the core forms the inside profile. In a conventional two-plate tool, the core is often on the moving side, but the part geometry, retention and ejection plan determine the arrangement. See the Protolabs guide to core and cavity placement.

Mitades del núcleo y la cavidad de un molde de inyección que muestran características de núcleo convexo y cavidad cóncava con pasadores de guía
Mitades del núcleo y la cavidad de un molde de inyección que muestran características de núcleo convexo y cavidad cóncava con pasadores de guía

At DFM review, agree on visible witness lines, locations where flash could affect assembly, and how the part will remain on the intended side before ejection.

Cross-section diagram showing conformal cooling channels inside injection mold core and cavity
Cross-section diagram showing conformal cooling channels inside injection mold core and cavity

Parting Line Strategy: Where Form Meets Function

The parting line is where your core and cavity halves separate, and its placement is the single most consequential decision in mold design. A flat, planar parting line along a single plane is the simplest and least expensive option — but real-world parts rarely offer that luxury. Stepped parting lines follow part geometry when features prevent a flat split, adding roughly 10-15% to tooling cost while resolving undercut situations without side actions. When parts have holes or features perpendicular to the mold opening direction, side actions (also called slides or lifters) extend the parting line into three dimensions, increasing both tooling complexity by 20-40% and cycle time by 2-5 seconds per side action.

Strategic parting line placement minimizes visible witness lines on cosmetic surfaces. For consumer-facing products, position the parting line along natural edges or transitions rather than across large flat faces. When working with glass-filled materials, keep the parting line at least 0.5mm away from sharp corners to prevent chipping during ejection. For multi-cavity tools, ensure the parting line plane is consistent across all cavities to maintain uniform clamp force distribution. A parting line mismatch of just 0.03mm creates visible flash that costs real money in secondary deflashing operations — typically $0.05-$0.15 per part for manual trimming, or $0.02-$0.05 for automated tumbling.

Draft Review for Cores and Cavities

Choose draft for the release direction, resin, depth, texture and ejection method. Internal features can grip the core as the part shrinks, so inspect deep sections separately.

Review textured faces with the toolmaker and texture supplier. Mark areas where draft or witness lines could alter fit, appearance or a sealing face.

Característica Draft review Qué hay que comprobar
Deep core Review depth, texture and resin grip. Check scuffing, distortion and ejection force on samples.
Rib or boss Check each side relative to the release direction. Confirm local wall thickness and functional fit.
Cosmetic wall Coordinate the surface finish and pull direction. Compare witness lines and marks to the appearance sample.
Shutoff or undercut Review release, steel contact and any side action. Confirm flash acceptance and maintenance access.

Cooling Layout and Dimensional Stability

Cooling layout affects dimensional consistency and cycle time. Ask the toolmaker to identify isolated core tips, thick sections and regions with limited water access. Use trial parts to verify distortion and dimensional repeatability.

Deep or narrow cores can have limited space for channels. Review conventional channels, baffles or conformal cooling against tool strength, maintenance access and the actual heat load.

Ejector Placement: Freeing the Part Without Damage

Ejector pin placement determines whether your part pops out cleanly or emerges with stress marks, deformation, and the telltale circular witness lines of poorly planned ejection. The fundamental rule: eject where the part is strongest, not where it’s most convenient for the mold base layout. Eject against ribs and bosses from behind, never against thin unsupported walls that will deflect. Ejector pins should contact the part through the B-side (core side), and the total ejector area must be sufficient to overcome the part’s adhesion to the core — which for deep-draw parts with minimal draft can exceed 50 MPa of holding force.

Use the cosmetic and functional requirements to decide where pin marks are acceptable. Review blades, sleeves or a stripper plate where the geometry needs a different distribution of ejection force.

  1. Check wall transitions, ribs and bosses where thick areas could affect sink or warpage.
  2. Mark critical dimensions, cosmetic faces, undercuts and the intended release direction.
  3. Review gates, cooling and ejector positions on the same tool concept before sign-off.
Ejector pin plate with array of polished ejector pins on mold core side
Ejector pin plate with array of polished ejector pins on mold core side

Matriz de aplicaciones industriales

Solicitud Core and cavity review focus
Automotive bracket Identify assembly datums, witness lines and loaded bosses.
Electronics enclosure Check connector opening, seal face, exterior finish and ejector marks.
Medical equipment housing Review cleanable geometry, acceptance criteria and any required documentation.
Industrial housing Review ribs, threaded inserts, replaceable details and inspection access.

Cost Decision Framework: Core-Cavity Design Economics

Compare tooling quotes using the same cavity count, tool material, surface finish, side actions, sample rounds and inspection scope. Ask each supplier to separate tooling, qualification and recurring production costs.

  • Compare one-cavity and multicavity options against the launch and repeat-order quantities.
  • Ask which side actions, inserts and maintenance items are included in the quote.
  • Agree how sample approval and dimensional reports will be handled before production.

For a volume comparison, spread the one-time tooling cost over the expected accepted quantity and add the quoted part, secondary-operation and inspection costs. State how scrap, tool maintenance and design changes are treated.

Common Core-Cavity Defects and Solutions

Defecto What to inspect before changing the tool
Parting-line flash Check shutoff contact and tool alignment, then review the process window and clamp settings.
Scuffing or drag Check draft, texture and part retention on the core.
Deformación Review wall thickness, gate orientation, cooling balance and conditioning after molding.
Ejector marks Check support, pin position, local wall thickness and ejection timing.

¿Por qué elegir el plástico de nailon para tu proyecto?

🏭

Fabricación de precisión

Más de 30 células de CNC y moldeo por inyección bajo un mismo techo

🔬

Certificado según la norma ISO 9001:2015

Sistema de calidad certificado, informes de inspección completos

⚡

Plazo de entrega de 15 a 25 días

Plazos de entrega rápidos, con opciones de envío urgente disponibles

🌍

Envíos internacionales

Transporte aéreo y marítimo a Norteamérica, Europa y Asia

Download Our Core & Cavity Design Guide

Guía de referencia gratuita en formato PDF que incluye tablas de selección de materiales, normas de diseño y listas de verificación para la evaluación de proveedores.

📥 Download Core & Cavity Design Guide (PDF)

Artículos relacionados

Normas SPI sobre acabados superficiales

Complete guide to A/B/C/D finish grades for injection molds

Chamfer vs Fillet: When to Use Each

Edge treatment selection for manufacturability and strength

Guía de tolerancias de ingeniería

ISO 2768 and DIN standards for plastic part tolerances

Mecanizado CNC frente al moldeo por inyección

Process selection guide for prototyping and production

Four mold steel grades side-by-side comparison for injection mold material selection
Four mold steel grades side-by-side comparison for injection mold material selection

Preguntas frecuentes

What’s the difference between the core and cavity in injection molding?

The cavity generally forms the exterior, and the core generally forms recesses, bores and internal surfaces. Assign fixed and moving sides based on the gate, part retention and ejection arrangement.

What is the minimum draft angle for deep cores?

There is no single minimum for every deep core. The toolmaker should review depth, resin shrinkage, texture, release direction and ejector access together.

How do I prevent flash at the parting line?

Inspect the location and repeatability of the flash. Verify shutoff condition, tool alignment, clamp and process settings before making changes. Agree what is acceptable at sealing and mating surfaces.

Can I water-cool deep cores effectively?

Deep-core cooling depends on space for channels, required core strength and operating conditions. Review the channel layout with the toolmaker and measure whether sample temperatures and dimensions stabilize during a trial.

Fuentes técnicas y verificación

Utilice los datos del proveedor como fuente de verificación, pero no como sustituto de las pruebas realizadas con el grado y la pieza concretos en las condiciones de servicio previstas.

Buyer Checklist Before Core and Cavity Review

Review Point Buyer Should Confirm Por qué es importante
Parting line Can it hide flash risk and support clean ejection? Parting line choice affects tool life and cosmetic quality
Cooling layout Are hot spots and cycle time targets defined? Poor cooling leads to warp, sink and unstable output
Gate strategy Is fill balance more important than gate visibility? Gate location changes weld lines and shrink behavior
Ejection Will the part release without mark-sensitive damage? Too much ejection force causes scuffing and distortion

For a mold design review, attach the CAD model and controlled drawing. Mark cosmetic faces, critical fits, insert locations and annual volume. Note the requested sample and inspection records.

Tell Us About Your Part

Este campo es obligatorio.
Este campo es obligatorio.
Este campo es obligatorio.
Este campo es obligatorio.
Este campo es obligatorio.
Este campo es obligatorio.
Este campo es obligatorio.
Ir arriba